Pioneer AVH-P4100DVD - Manual (Page 56)

Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
% Touch TEL on the initial menu to select
the setting.
Touch
TEL until the desired setting appears in
the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turn the sound muting/attenuation
off
Notes
! The sound is turned off, Mute is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed and
no audio adjustments, except volume control,
are possible.
! Operation returns to normal when the phone
connection is ended.
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
! This function is initially set to Auto so that
this unit automatically adjusts the TV signal
setting.
! About your country TV signal, consult with
your nearest Pioneer dealer.
! Only when a Pioneer TV tuner (e.g. GEX-
P5700TVP) is connected to this unit, you
can operate this function.
% Touch TV Signal on the initial menu to
select an appropriate TV signal.
Touching
TV Signal switches TV signal set-
tings in the following order:
Auto
—PAL—SECAM
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1 Touch PIN Code Input on the initial
menu.
PIN code input display appears.
2 Touch 0 to 9 to input the PIN code of
your Bluetooth audio player.
# To cancel the inputted numbers, touch C.
3 After inputting PIN code (up to 16 di-
gits), touch .
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
Low. Normally, leave the set-
ting at High to ensure quality sound.
! Only when the multi-channel processor
(DEQ-P6600) is connected to this unit, you
can operate this function.
Initial Settings
En
56
Section
15