Pioneer AVH-P5100DVD - Manual (Page 8)

When connecting to separately sold power amp
7
Connecting the Units
Blue/white
Connect to system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO connector will
differ depending on the type of vehicle.
Connect 6* and 7* when Pin 5 is an antenna
control type. In other types of vehicles, never
connect 6* and 7*.
Blue/white (6*)
When you connect the separately sold multi-
channel processor (e.g., DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
This product
Front output
(FRONT OUTPUT)
Rear output or subwoofer output
(REAR/SUBWOOFER/DEQ OUTPUT)
When you connect the multi-channel
processor to this unit, refer to multi-channel
processor’s installation manual for the
connection method.
15 cm
15 cm