Konica Minolta bizhub PRESS 1250 - Manual (Page 132)

Parameter Option Description
Spot color Spot color Provides the following options:
● Spot library—Applies the CMYK values that are defined in the
spot color dictionaries. You can edit these values using the Spot
Color Editor tool. The spot color dictionaries supported are: HKS,
DIC Color Guide, Pantone, Pantone GOE, Pantone Plus, and
TOYO. See the Spot Color Editor window for the complete list.
● Original CMYK file values—Uses the CMYK values from your
file.
● When using PANTONE spots—Enables you to select which
PANTONE library to use for your PANTONE spots. Provides the
following options:
○ Use PANTONE Plus library
○ Use legacy PANTONE library
Protect colors CMYK
Note: If you protect RGB, gray, or CMYK colors, all colors in the job
that include the same color combination as the protected color, will
also be protected.
Provides the following options:
● Preserve black color—Preserves pure black during
transformation.
● Use protected CMYK values—Retains CMYK colors as defined
in the Spot Color Editor.
RGB Use protected RGB values—Retains RGB colors as defined in the
Spot Color Editor.
Gray Use protected gray values—Retains gray colors as defined in the
Spot Color Editor.
Finishing tab in the job parameters window
Apply these settings to specify how to finish your job.
Parameter Option Description
Finishing Lists the available finisher options. This list depends on the modules
that are installed on the printer.
Stapler sub
tray Multi hole punch—This option is available only if the multi hole
punch module is connected.
124 Chapter 9—Job parameters