Konica Minolta bizhub C20PX - Manual (Page 117)

Ethernet Menu 99
DEFAULT GATEWAY
DHCP
BOOTP
ARP/PING
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 000.000.000.000
Purpose If there is a DHCP server on the network, specifies whether
the IP address and other network information is automati-
cally assigned by the DHCP server.
Options ON
OFF
Default ON
Purpose If there is a BOOTP server on the network, specifies
whether the IP address and other network information is
automatically assigned by the BOOTP server.
Options ON
OFF
Default OFF
Purpose Select whether or not the IP address is automatically
acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not automatically
acquired.
Options ON
OFF
Default OFF