Konica Minolta bizhub PRESS C8000 - Manual (Page 78)

IC-306 6-22
6.5 Transmission to the SMB server 6
6.5 Transmission to the SMB server
When you send the scanned data to an SMB server, necessary procedures depend on whether the SMB
server is registered in advance or it is input manually.
d
Reference
Refer to the following pages.
When an SMB server is Already Registered: page 6-22
When an SMB server is Input Manually: page 6-24
When an SMB server is Already Registered
1
Press [SCAN] tab.
2
Press [SMB].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. For information on the initial
settings of [SCAN] tab, contact your administrator of the copier.
3
Press the Name of the address SMB server.
% You can refine the registered address by the search function. For details, refer to page 3-8.
% You can refine the Name by using [A to Z]. For more information on how to use [A to Z], refer to
page 6-2.
% To deselect the Name, press the selected Name again.
% If you input an address manually, refer to page 6-24.