12 before successive holidays, 13 papers, 14 glue pellet – Konica Minolta bizhub PRESS C1070 User Manual
Page 15: 15 perfect binder, Before successive holidays -7, Papers -7, Glue pellet -7, Perfect binder -7
bizhub PRESS C1070/C1070P/C1060, bizhub PRO C1060L
2-7
2.1
Safety Information
2
2.1.12
Before Successive Holidays
2.1.13
Papers
2.1.14
Glue Pellet
2.1.15
Perfect Binder
Unplug the product when you will not use the product for
long periods of time.
Do not use stapled paper, conductive paper (such as silver
paper or carbon paper) or treated heat-sensitive/inkjet paper,
otherwise a fire may result.
Do not put glue pellets close to fire. Glue pellets are flamma-
ble and easy to catch on fire.
Do not swallow glue pellets. Should you swallow any, drink
large amount of water or milk to vomit, and immediately con-
sult a doctor.
Keep out of reach of children in order to avoid unexpected
accidents.
Do not use the perfect binder without ventilation for an ex-
tended period of time. Ensure to ventilate the room on a reg-
ular basis. It is recommended that the perfect binder should
be installed in a place with a local exhaust system. Using the
perfect binder in a room without appropriate ventilation could
pose health hazard.
Handle melted hot glue carefully. If it gets in the eye, do not
rub nor tray to open the eye, but cool it with cold water im-
mediately and consult a doctor.
Do not touch melted hot glue as it may cause burn injury. If it
sticks on your skin, cool that part of the skin with cold water
immediately and consult a doctor.
Do not touch the glue tank unit immediately after you turned
off the machine to avoid burn injury. Wait until the unit is no
longer hot when you handle it directly with your hands.
Do not put the glue hopper and the glue tank unit close to fire.
Glue is flammable and easy to catch on fire.
Do not get close to the vapor emitted from melted hot glue.
If you have irritation in or around your eyes, nose or throat,
move to an area where you can get fresh air.
Do not block up the vent for the fan on the back of the perfect
binder. This will prevent the discharge of heat, and may
cause fire or breakdown.
Do not change the temperature setting for the glue tank unit.
This may cause fire or breakdown.