Acomdata.com RPDOCKU2FA - Manual (Page 31)

to communicate with it. When you dismount a device, the com-
puter no longer sees it. The device may still be running but the
computer cannot access it, as though the device no longer exists.
2. Once all necessary modules are dismounted, you can safely
remove them from the stack (even if they are still powered on).
Replace any modules you had to remove in order to access the
target module. They will power on automatically when stacked on.
Turning Off a RocketPod Stack
Important Note: With the exception of RocketPod devices with
push-button dismount, the power button of a RocketPod device is
rendered inactive when that device is used as a module in a stack;
the power can only be controlled via the DockPod.
1. Dismount all stacked-on RocketPod modules according to the
instructions in their respective User’s Guides.
2. Press the power button on the DockPod. The entire RocketPod
stack will power off.
29