Acomdata.com RPDOCKU2FA - Manual (Page 27)

H
OW TO
S
TACK
&P
LAY
R
OCKET
P
OD
M
ODULES
Stacking RocketPod Modules
1. With the DockPod powered on, care-
fully place a RocketPod module onto it,
making sure the orientation is the same
and the devices are aligned. When placed
correctly, the DockPod connector will mate with
the connector at the bottom of the RocketPod
module you are stacking, and all four
feet of the module should sit firmly on
the DockPod. When the connectors
mate, you may hear a brief ‘scratch-
ing’ sound as the metal terminals in the
connectors make contact. This is normal.
2. Press down with only moderate force on the upper
device to make sure it is firmly seated. Do not use excessive force
or you may damage the devices.
25