Acomdata.com RPDOCKU2FA - Manual (Page 25)

USB cable
FireWire cable
AC adapter &
power cord
DockPod
1. Plug the AC adapter cord into the power
port on the back of the DockPod.
Plug the power cord into the
socket on the AC adapter. Plug
the other end into a three-
prong outlet.
2. Plug the USB 2.0 and/
or FireWire cable into
the correct ports on
your computer and the
DockPod. You can plug in
either the USB 2.0 connec-
tion or the FireWire connec-
tion or both, depending on what
connections you have available with
your computer system and what type of
RocketPod modules you plan to stack onto
your DockPod.
3. Press the power button on the DockPod; it will light up blue. The
voltage meter only becomes active when a RocketPod module is
stacked onto the DockPod.
23