Sheffer CL SERIES - Manual (Page 5)

CLA 3 /
4
" AND 1 1 /
8
" BORES & CLH 1 1 /
8
" BORE ONLY
Parts List
1 CL-4
Policy:
The policy of the Sheffer Corporation is one of continual improvement in design and manufacture to assure still finer products, hence,
specifications are subject to change without notice.
Limited Warranty:
Sheffer warrants its products to be free from defects in material and workmanship for a period of one year from the date of shipment. This
warranty does not cover field labor charges for parts removal and replacement, adjustments, repairs or other work, corrosion, electrolysis,
mineral deposits or normal deterioration, misapplication, modification, or change in original operating conditions; components supplied by
others; defects in parts resulting from abuse, negligence, neglect, accident, fire or explosion, or seals and other components subject to normal
wear.
The sole and exclusive remedy against Sheffer shall be for the repair or replacement of parts returned transportation prepaid to Sheffer’s factory
and found by Sheffer to be defective. Replacement parts provided shall not extend the warranty period for said parts or for the total unit.
IN CONSIDERATION OF THIS EXPRESS WARRANTY NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO INCIDENTAL OR
CONSEQUENTIAL DAMAGES) SHALL BE AVAILABLE. THIS WARRANTY SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND OF ALL OTHER OBLIGATIONS ON THE PART OF SHEFFER.
Sheffer neither assumes, nor authorizes any person to assume for it, any other obligation or warranty.
Parts List
MATCH-
ING
SERIES A DD ROD WT
PART THD. (BOLT ER KK EYE IN
NUMBER DESCRIPTION CLA CLH DEPTH CA CB CD CL CW SIZE) E RAD. F FL THD. LR MR R REF/REM S OZ.
3 /
4
MBP-CLA PIVOT MOUNTING • — — 3 /
8
1 /
4
3 /
4
3 /
16
#8-32 1 1 /
8
— 3 /
16
5 /
8
— — 5 /
16
13 /
16
— — 1
BRACKET
3 /
4
MBC-CLA CLEVIS MOUNTING • — — 3 /
8
1 /
4
3 /
4
3 /
16
#8-32 1 1 /
8
— 3 /
16
5 /
8
— — 5 /
16
13 /
16
— — 1 1 /
2
BRACKET
MBP-CLA PIVOT MOUNTING • — — 1 /
2
5 /
16
1 1 /
4
#10-32 1 1 /
2
— 1 /
4
3 /
4
— — 3 /
8
1 1 /
8
— — 3
BRACKET
MBC-CLA CLEVIS MOUNTING • — — 1 /
2
5 /
16
1 1 /
4
#10-32 1 1 /
2
— 1 /
4
3 /
4
— — 3 /
8
1 1 /
8
— — 4
BRACKET
MBC-A30510 CLEVIS MOUNTING • — — 5 /
8
3 /
8
1 1 /
4
5 /
16
1 /
4
-28* 1 5 /
8
— 5 /
16
15 /
16
— 9 /
16
3 /
8
1.19 -50305 — 6
BRACKET -70305
MBC-A305 PIVOT MOUNTING • — — 5 /
8
3 /
8
1 1 /
4
5 /
16
1 /
4
-28* 1 5 /
8
— 5 /
16
15 /
16
— 9 /
16
3 /
8
1.19 -50305 — 6
BRACKET -70305
CLS-A025 ROD CLEVIS AND PIN • 5 /
16
11 /
16
1 /
4
1 /
4
— 1 /
8
— 1 /
2
1 /
4
— — 1 /
4
-28 5 /
16
— — — 1 /
2
1
CLS-A031 ROD CLEVIS AND PIN • 3 /
8
13 /
16
1 /
4
5 /
16
— 3 /
16
— 5 /
8
5 /
16
— — 5 /
16
-24 3 /
8
— — — 5 /
8
1
CLS-A2043 ROD CLEVIS AND PIN • 3 /
4
1 3 /
8 11 /
16 3 /
8
— 9 /
32
— 1 1 /
4 3 /
8
— — 7 /
16
-20 5 /
8
— — — 3 /
4
6
NOTE: Mounting brackets can be cap screwed to rear heads to make pivot or clevis mount cylinders. Two cap screws furnished with each bracket.
*Indcicates tapped holes; other DD Dim. are clearance holes for indicated bolt sizes.