Norgren F22 Series Datasheets - Manual (Page 2)

ALE-16-3
All Dimensions in Inches (mm)
Littleton, CO USA Phone 303-794-2611 www.norgren.com
F22 Stainless Steel Filters
Technical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature: 0° to 175°F (-20° to 80°C) *
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Particle removal:
25 µm standard
5 µm optional
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Typical flow with 25 µm element at 90 psig (6.3 bar) inlet pressure, and 5 psig
(0.35 bar) pressure droop: 98 scfm (46 dm 3 /s)
Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread
Automatic drain operating conditions (float operated):
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm
3 /s)
Manual operation: Depress pin inside drain outlet to drain bowl
Nominal bowl size: 8 fluid ounce (0.24 liter)
Materials
Body: Stainless steel
Bowl: Stainless steel
Element: Sintered stainless steel
Elastomers: Synthetic rubber
PRESSURE DROP
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
PORT SIZE: 1/2"
ELEMENT: 25
µ m
2.5
(36)
4.0
(58)
10.0
(150)
6.3
(90)
8.0
(116)
INLET PRESSURE: psig (bar g)
0 20 40 60 80 100 dm 3 /s
AIR FLOW
0 40 80 120 160 200 scfm
FLOW CHARACTERISTICS
Typical Performance Characteristics
6.77 (172)
9.13 (232)**
1.34 (34)
1.14 (38)
∅
1.50 (76)
3.90 (99)
0.67 (17)
6.22 (158)
8.58 (218)**
0.67 (17)
**Minimum clearance required to remove bowl
Automatic Drain Manual Drain
Service Kits
Item Type Part number
25 µm, automatic drain F22-100A
5 µm, automatic drain F22-100A(5)
Service kits
25 µm, manual drain F22-100M
5 µm, manual drain F22-100M(5)
Replacement drains Automatic 3000-87
Manual 2273-18
Service kit Orientable metal bowl 5860-RK
Service kits include o-rings, gaskets, specified filter elements, drain
strainer and strainer cap.