Vlm for vmware vcloud air – KEMP vCloud Air User Manual
Page 18
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 18 / 24
VLM for VMware vCloud Air
Installation Guide
Figure 5-8: Add a new IP address
4. Enter the IP Address or network. Valid entries here are either a single IP, for example
192.168.0.1, or a network in Classless Inter-Domain Routing (CIDR) format, for example
192.168.0.0/24.
5. Click Add Address.
Figure 5-9: IP address configured
6. Click Modify.
7. Specify the location by entering the coordinates and click Save.
Alternatively, select the country from the Countries drop-down list.
Figure 5-4-10: Modify/Delete buttons
The existing IP ranges can be modified or deleted via the buttons provided
on the IP Range Selection Criteria screen.
8. In the main menu of the LoadMaster WUI, select Manage FQDNs.
Figure 5-11: Configured FQDNs
9. Click Modify on the relevant FQDN.
Figure 5-4-22: Selection Criteria
10. If you entered a Proximity via the coordinates in the IP Range Selection Criteria screen,
select Proximity in the Selection Criteria drop-down list.
If you selected a location, select Location Based.