EXONIC 500 - Manual (Page 6)

EN - 5
BUTTON TIPS
Radio
To fine tune the radio, press |<< or >>| briefly.
To search the station automatically, press |<< or >>| for more than 2
seconds.
Disc Playback
Track skip: Press |<< or >>| briefly to go to the next or previous track.
Track seek: Press |<< or >>| for more than 2 seconds to seek the
forward or previous track.
AMS : Auto Memory Store
Press AMS briefly to scan the preset station 1-6 for 5 seconds each.
Hold for more than 2 seconds, the 6 strongest available station will be
automatically saved in the memory of preset buttons 1-6 .
Viewing Clock Time During Radio/Disc Playback
Press DISP (once for Radio mode or twice for other modes), display
shows the clock time for 5 seconds.
Setting The Clock Time
Press DISP, time displays. Press again for more than 2 seconds, time
display blinks.
Rotate the knob clockwise to set the hours, rotate the knob counter-
clockwise to set the minutes, press DISP again to exit the clock
setting.
1. Loading SD/MMC Card
Press button to flip down the panel, insert t h e S D / M M C c a r d
into the slot, with the front side at left. The unit will play the music
automatically.
2. Take out SD/MMC Card
Press SRC button and switch to non CARD mode, open the panel,
slightly press the card, take out the card when it was popped out.
3. Loading USB equipment
Open the cap, insert the USB into the connector and the unit play the
music in the USB storer automatically.
4. Take out USB equipment
Press the SRC button and switch to non USB-DRIV mode, then take off
the USB storer, close the cap.
USB/SD/MMC MP3 PLAYBACK
USB/SD/MMC Notes
USB functions (flash memory type) MP3 music play
1. SD/MMC card support.
2. USB flash memory 2 in 1 (SD/MMC) support.
3. Fat 12 / fat 16 / fat 32 is possible.
4. File name: 32 byte / dir name: 32 byte / tag name: 32 byte.
5. Tag (ID3 tag ver 2.0)
- title / artist / album: 32 byte support.
6. Multi card reader not support.
7. USB 1.1 support.
USB 2.0 support
(It can not support USB 2.0 speed. Just, get the same speed with
USB1.1).
Not all USB devices are compatible with the unit.