Balboa Water Group BP 50Hz - Manual (Page 56)

56
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
5/02/13
DEMO (DEMO MODE)
Demo Mode is not always enabled, so it may not appear. This
is designed to operate several devices in a sequence in order
to demonstrate the various features of a particular hot tub.
INFO (SYSTEM INFORMATION SUB-MENU)
The System Information Menu displays various settings and
identification of the particular system. As each item in the
menu is highlighted, the detail for that item is displayed at the
bottom of the screen.
SSID (SOFTWARE ID)
Displays the software ID number for the System.
MODL (SYSTEM MODEL)
Displays the Model Number of the System.
SETP (CURRENT SETUP)
Displays the currently selected Configuration Setup Number.
SIG (CONFIGURATION SIGNATURE)
Displays the checksum for the system configuration file.
HEATER VOLTAGE (FEATURE NOT USED ON CE
RATED SYSTEMS)
Displays the operating voltage configured for the heater.
HEATER WATTAGE AS CONFIGURED IN SOFTWARE
(CE SYSTEMS ONLY)
Displays a heater kilowatt rating as programmed into the
control system software (1-3 or 3-6).
H _ (HEATER TYPE)
Displays a heater type ID number.
SW _ (DIP SWITCH SETTINGS)
Displays a number that represents the DIP switch positions of
S1 on the main circuit board.
PANL (PANEL VERSION)
Displays a number of the software in the topside control panel.
A / B (A/B SENSOR TEMPERATURES)
When this is set to On, the temperature display will alternate
to display temperature from Sensor A and Sensor B in the
heater.
TP400, TP600 Message Codes
The following are messages and features that can appear on the TP400 and TP600 panels.
NOTE: LCD readouts may look slightly different than shown on screen.
MESSAGE CODES
(Found on the pages listed)
M0[XX] numbers are Message Codes 44
M015 51, 58
M016 48, 57
M017 48, 57
M019 57
M019* 44
M020 51, 58
M021 51, 58
M022 51, 58
M026 51, 58
M027 48
M028 48, 57
M029 51, 57
M030 48, 57
M031 58
M031, Sensor A: 51
M032 58
M032, Sensor B: 51
M033 57
M034 51, 58
M035 51, 58
M036 51, 58
M037* 46