Karcher BD 530 Bp - Manual (Page 27)

– 10
 Remove the vacuum bar.
 Unscrew the star grips.
 Remove the plastic parts.
 Remove the vacuum lips.
 Turn the vacuum lips or insert new
ones.
 Insert the plastic parts.
 Screw in and tighten the star grips.
 Turn the button for the setting of the ad-
vance speed in "– " direction.
 Raise the disk brush.
 Turn the disk brush by approx. 45° in
anti-clock-wise direction.
 Remove the disk brush at the bottom.
 Insert new disk brush in reverse se-
quence.
 Set the advance speed.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:

Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.
 Remove brushes to avoid damage to
the brushes.
 If you want to transport the machine on
a vehicle secure it from slipping using
belts/ ropes.
ƽ
Danger
Risk of injury!
BD 530 Bp: Before carrying out any tasks
on the device, switch off the button for
brush operations and suction turbine and
pull out the charger plug.
BD 530 Ep: Turn the main switch to "OFF"
and disconnect the mains plug prior to per-
forming any work on the appliance.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Empty the waste
water reservoir and the fresh water reser-
voir prior to performing maintenance on the
appliance.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Maintenance Works
Turn or replace vacuum lips
Replacing the disk brushes
Maintenance contract
Frost protection
Transport
Faults
27 EN