Karcher HD 5-15 C + FR - Manual (Page 20)

– 6
Caution
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
For longer work breaks or if a frost free stor-
age is not possible:

Drain water.
 Pump in conventional frost protection
agents through the appliance.
Note: Use normal glycol-based anti-freez-
ing agents for automobiles.
Note: Observe handling instructions of the
anti-freeze agent manufacturer.

Operate device for max. 1 minute until
the pump and conduits are empty.
ƽ
Danger
Risk of injury and damage! Observe the
weight of the appliance when you transport it.

Pull the device behind you at the handle
for transporting it over longer distances.
 For devices without hose drum, push the
handle downward to carry the appliance.
To carry, hold the appliance at the han-
dles and not at the pushing handle.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
ƽ
Danger
Risk of injury and damage! Note the weight
of the appliance in case of storage.
ƽ
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
 Check connection cable for damages
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer
service person/ electrician.
 Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure
hose.
 Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
 Check oil level Please contact Custom-
er Service immediately if the oil is milky
(water in oil).
 Clean the sieve in the water connection.
 Clean filter at the detergent suck hose.
 Oil change.
 Unscrew the fastening screws of the
device hood; remove the device hood.
 Remove the lid of the oil container.
 Tilt the appliance forward.
 Drain the oil in a collection basin.
 Fill in new oil slowly; air bubbles should
go out.
 Attach the lid of the oil container.
 Fasten the device hood.
For oil type refer to technical specifications.
Frost protection
Shutdown
Transport
Storage
Maintenance and care
Safety inspection/ maintenance
contract
Before each use
Weekly
monthly or after 500 operating
hours
Oil change
Dispose of old oil ecologically or turn in at
a gathering point.
20 EN