Karcher T 12-1 - Manual (Page 9)

– 2
– Never immerse the electrical suction
brush in water or any other liquids while
cleaning.
– After wet cleaning the carpets, use the
machine only after they are completely
dry; otherwise the machine can get
damaged.
– Never use the machine to suck up
match sticks, burning ash, cigarette
butts or fluids. Avoid sucking in hard,
pointed objects as they can damage the
machine.
– Please keep children away from electri-
cal appliances.
– Only trained technicians may carry out
repairs to electrical appliances. Improp-
er repairs can pose serious hazards to
the users.
– In case of any malfunctions, please
contact your dealer or the concerned
Customer Service.
– No liability for damages can be assumed
if the appliance has been put to improper
use or has been used wrongly.
– Please follow the safety instructions of
your basic appliance.
The rotating brush in the electric suction
brush loosens the dirt in the carpet much
better than traditional vacuum cleaners.
This brings about a more intensive cleaning
effect.
 Insert the telescopic suction pipe in the
connection hub of the suction head.
Note: The safety pin must lock into the
bore.

Insert the plug of the suction head into the
socket at the telescopic suction pipe.
 Insert the manifold of the electrical suc-
tion hose into the telescopic suction
pipe and turn until the safety pin locks
into the hole.
 Insert the fast-on connection of the tele-
scopic suction pipe into the socket at the
manifold of the electrical suction hose.
Illustration

Only for vaccum cleaner T201: Replace
the yellow safety ring at the suction con-
nection of the vacuum cleaner with the
enclosed black safety ring (item 5).
Push the cover (item 4) over the suction
connection.
Illustration

Insert the electrical suction hose into
the suction connection of the vacuum
cleaner.
 Only for vaccum cleaner T201: Push
the cover on the safety ring and secure
the electronic suction hose. Check and
ensure proper fitting of the electronic
suction hose.
Illustration

Insert the plug of the electrical suction
hose into the socket at the front side of
the vacuum cleaner.
Note:The appliance is now ready for oper-
ation. The appliance is switched on through
the startup; please read the operating in-
structions and the catalog "Safety instruc-
tions for dry/ wet vacuum cleaners“.
ƽ
Danger
Do not drive the rotating brushes over the
mains cable! Carry the appliance over
steps and high thresholds!

Pick up the larger parts such as cloth
pieces, paper, etc. from the floor prior to
cleaning. This will prevent the brush
roller from being blocked.
 Switch on/off the electrical suction
brush using the switch at the handle.
Note: You have to work with the brush roll-
er switched off if you want to vacuum clean
high-flounce carpets, carpet edges, animal
skins, etc.
Note: If the suction head is hard to push,
decrease the vacuum cleaner power. The
appliance function is not significantly im-
paired by this.
Function
Start up
Assembly
Operation
9 EN