beautypg.com

Glossary of terms – AstroStart Security System VSS-113 User Manual

Page 16

background image

If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm

button of the transmitter will not disarm VRS

®

. To disarm the VRS

®

during a VRS

®

trigger

sequence:

1. Turn the ignition on.

2. Press the Valet switch the pre-programmed number of

times to disarm the VRS

®

system.

Note: If the VRS® system has begun its chirping sequence, the ignition must

be turned off, then on to disarm. If you are driving the vehicle at the time, pull to a

safe place away from traffic and follow the triggered sequence disarm procedure.

Glossary of terms

Automatic Engine Disable (AED): This feature protect the vehicle from being stolen at all times,

regardless of whether or not the alarm is armed. If AED is programmed on, the starter of the

vehicle will be disabled 30 seconds after the ignition is turned off.

Control Unit: The “brain” of your system. Usually hidden under the dash area of the vehicle. It

houses the microprocessor which monitors your vehicle and controls all of the system’s functions.

Fail-Safe Starter Kill: An automatic switch controlled by the security system which prevents the

vehicle’s starter from cranking whenever the system is armed. The vehicle is never prevented from

cranking when the system is disarmed, in Valet mode, or should the starter interrupt switch itself

fail. Your system is ready for this feature, however installation may require additional labour.

Input: A physical connection to the system. An input can be provided by a sensor, pinswitch or

through an existing system in the vehicle, such as ignition or courtesy lights.

LED: Blue light mounted somewhere in the vehicle. It is used to indicate the status of your system.

It is also used to report triggers and faults in the system or sensors.

Shock Sensor: This is a sensor mounted in the vehicle that is designed to pick up impacts to the

vehicle or glass.

Siren: Noise generating device usually installed in the engine compartment of the vehicle. It is

responsible for generating the “chirps” you hear, as well as the six tones you hear while the alarm

is triggered.

Transmitter: Hand-held, remote control which operates the various functions of your system.

© 2006 A

STROFLEX

E

LECTRONICS

– A

LL RIGHTS RESERVED

14