Hubbardton Forge 124304 - Manual (Page 2)

Installation Instructions
A224
For Plain Semi-Flush 12-4304 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
23191
To Install Glass (Figure 4)
Component Parts
E Knurl Ball (3)
F Glass
G Ring
Assembly
1. Remove the knurl balls (E) from the ring
assembly (G).
2. Install Bulbs.
3. Insert one of the studs on the ring assembly (G)
up through the hole in one of the fixture arms and
secure with a knurl ball (E). This allows the ring
assembly to hang at an angle from the fixture.
4. Place glass (F) into ring assembly (G) and raise it
so the remaining studs are inserted through the
scroll. Securing all studs with knurl balls (E).
5. Restore electricity at main breaker box.
Note: Future bulb changes can be accomplished by
removing one of the knurl balls.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)