Samsung SGH-T699DABTMB - Manual (Page 141)

Messages 135
Important! Remember to manually place the cursor in the
correct spot and enter a Domain name before the
“[Domain]\[user name]” entry. Most servers only
provide a username.
8. Update or re-enter your Exchange server information
within the appropriate field. This field can often be
populated with incorrect or out of date information
provided by your server.
• Exchange Server: your exchange server remote email
address. Typically starts with mail.XXX.com. Obtain this
information from your company network administrator.
Important! Do not accept the default entry as this is a guess
based on returned information.
• If your network requires SSL encryption, tap the Use secure
connection (SSL) field to place a check mark in the box and
activate this additional level. Most often, this option should be
enabled.
• If your network requires that you accept SSL certificates, tap
the Accept all SSL certificates field to place a check mark in
the box and activate this additional level. Most often, this option
is not required. Confirm this information with your IT
Administrator.
Important! If your Exchange server requires this feature,
leaving this field unchecked can prevent
connection.
9. Consult your IT Administrator if it is necessary to
enable the Use client certification option.
10. With the new server information entered, tap Next.
11. Read the on-screen Activation disclaimer and, when
prompted, tap OK. The device then verifies your
incoming server settings.
12. If prompted, read the Remote security administration
information and tap OK to accept the service and
continue.