Samsung ER-GX1LZBAA - Manual (Page 140)

ŝ139Ş
Setting the Exposure
About the Button
The aperture and shutter speed are automatically adjusted to the appropriate exposure at that
moment if the button is pressed in (Manual) mode. You can choose from the following
three adjustment methods in [AE-L bttn on M expsr] in the [ Custom Setting] menu.
1 Program Line The aperture and shutter speed are adjusted automatically.
2 Tv Shift The aperture is locked and the shutter speed is adjusted automatically.
3 Av Shift The shutter speed is locked and the aperture is adjusted automatically.
ƈ This mode is useful for the long exposures required for shooting night scenes and fireworks.
The shutter remains open as long as the shutter release button is kept pressed.
Using the (Bulb) Mode
1. Set the mode dial to .
ƃ Turn the e-dial to adjust the aperture value.
ƃ Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the
[ Custom Setting] menu. (p.141)
ƃ Use a sturdy tripod and the cable switch SSR-D1 (optional) to prevent camera shake when using
(Bulb) mode. Connect the cable switch to the cable switch terminal.
ƃ Bulb shooting is available when using the remote control shooting mode (p.59). The shutter
remains open as long as the optional remote controlŖs shutter release button is held down.
ƃ Noise reduction is a process to reduce noise (image roughness or unevenness) caused by low
shutter speed. Set in [Noise Reduction] in the [ Custom Setting] menu. (p.100)
ƃ When in (Bulb) mode, the sensitivity is equivalent to ISO 200 when sensitivity is set to [AUTO].
INFORMATION