Wesley BC-6200-8SA - Manual (Page 15)

15 Owner’s Manual and Service Guide – BCG Series
OPERATING INSTRUCTIONS
Headlight / Tail-Light and Switch (Optional): Some
vehicles may include the headlight and/or tail-light (Figure 7)
option. In which case, there will also be a rocker switch to
turn the lights on or off. (Figure 8).
F IGURE 7
F IGURE 8
S PEED C ONTROL P EDAL
:
The speed control pedal, (Figure 9) is located to the right of
the brake pedal. It controls the speed of the vehicle and is
operated with the right foot like the accelerator of an
automobile. Depressing the pedal starts the motor.
Releasing the pedal stops the motor. Reverse speed is half
of forward speed.
F IGURE 9
Brake Pedal: The brake pedal, Figure 10, is located to the
left of the accelerator pedal and is the smaller of the two.
Applying pressure on the brake pedal will slow the vehicle
down in addition to the motor braking. If driving down an
incline, the brake pedal should be used to control the speed.
F IGURE 10
The brake pedal has a brake lock feature which can lock the
brake pedal into the down position (Figure 11), thus acting
as a parking brake. Simply push the brake pedal all the way
down while pushing at the bottom edge of the brake pedal.
This will engage the black pedal lock to latch onto the body
frame, retaining the brake pedal in the engaged position.
To release, simply push the top edge of the brake pedal and
the brake pedal will disengage and be free to move to its
disengaged position (Figure 12).
FIGURE 11 FIGURE 12
Headlight/Taillight Switch