Campbell Scientific LNDB LoggerNet Database Software - Manual (Page 14)

LNDB
3. Selecting Datalogger Tables
The first tab on the main screen is Setup. From this screen, you select the
datalogger tables for which you would like to move data into the database. The
right side of the screen changes depending upon whether a station or a table is
highlighted in the left tree as described below.
If you check a station in the left tree, all final storage tables for the station are
selected. This includes all tables except Public, Status, ports_and_flags, and
__inlocs__. If a table has a conflict and is enabled for storage, its icon and its
parent station’s icon are overlaid with an error icon.
The toolbar at the top of the Setup tab can be used to Select All Final Storage
Tables for all stations or to Deselect All Tables for all stations.
If a change is made to the setup, the Apply and Cancel buttons are enabled.
Press Apply to save the pending edits and restart the engine. Press Cancel to
undo the pending edits.
If a station, table or column that is enabled for storage has an
invalid name (i.e., contains ', ", or `), an icon and text indicating
such is placed at the top of the screen. The issue can be resolved
by changing the station name in LoggerNet's Setup Screen or by
changing the table or column name in the CRBasic program. NOTE
8