Samlex America SR1000-148 - Manual (Page 5)

SR Series Inverter
4
1-2-7. Install the inverter in a well-ventilated area. Do not block the front
air vents, or the rear air exhausts of the unit.
1-2-8. Wiring: Adequate input power must be supplied to the inverter for
proper use; correct wiring sizes must be ensured.
1-2-9. Mount the inverter such that the fan axis is horizontal.
1-2-10. Do not operate the inverter close to combustible gas or open fire.
1-2-11. Do not operate appliances that may feed power back into the
inverter.
1-2-12. Temperature: The inverter should be operated in an ambient
temperature range of 0℃ to 50 ℃ or else the output efficiency
may be affected. Air flow to the inverter must not be restricted.
2. Functional Characteristics Introduction
2-1. System
The unit is a highly reliable DC-AC inverter system, designed with advanced
power electronic and microprocessor technology offering the following features:
▌
The inverter is equipped with a self diagnosis microprocessor that is
able to identify and show all failure messages on the LED/LCD display,
with associated visual/audio alarms.
▌
1U height x 19” width x 13.6” depth, 19” rack mountable.
▌
Pure sine wave output (THD < 2%) to operate higher-end electronic
equipment.
▌
Built in 15A(120VAC) and 10A(250VAC) rated Bypass relay.
▌
Speeds up transfer time as a result of synchronized operation with the
AC source at all times that allows the transfer to be interruption-free for
sensitive equipment.
▌
Intelligent software for power management.
▌
AC Inlet and Dual AC outlets connection model option.
▌
Loading and temperature controlled cooling fan.
▌
Fan aging, failure, disconnection and blockage alarm.
▌
Selectable Bypass/Inverter modes.
▌
Local and remote management and control.