MagTek USB KB INTELLIHEAD - Manual (Page 40)

USB Keyboard Emulation Swipe Reader
32
SS JIS TYPE 2 PROPERTY
Property ID:
0x1B
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x7F ‘DEL’
Description: This character is sent as the start sentinel for cards that are encoded in the JIS
type 2 format. If the value is in the range 0 – 127 then the equivalent ASCII
character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
ES JIS TYPE 2 PROPERTY
Property ID:
0x1C
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x7F ‘DEL’
Description: This character is sent as the end sentinel for cards that are encoded in the JIS
type 2 format. If the value is in the range 0 – 127 then the equivalent ASCII
character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
PAN NAME DATE ENABLE PROPERTY
Property ID:
0x1D
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x00 (DISABLED)
Description: When this property is set to 0, the reader data transmission will use the
standard mode of sending track information as described in SECTION 4.
When this value is set to non-zero, and Track 1 or Track 2 is determined to be
in a financial data format, the reader will transmit the PAN (Primary Account
Number), Name and Expiration date using the following format:
If Track 1 is available:
Character>
Track 2 data will not be transmitted