Pure Evoke-1S - Manual (Page 11)

9
8. If you have selected a digital or FM radio alarm you
can push the Tune dial to select ‘Alarm volume’
and turn to adjust the volume level for the alarm
from 1 (very quiet) to 32 (very loud).
That’s it! You can see if the alarm is currently
switched on in the ‘Full screen time’ display (see
page 7). Alarms can be set and adjusted from
standby by pressing the
Timer button.
Note: An outlined bell shows that the alarm will not
sound within the next 24 hours.
Note: The alarm function does not work when
Evoke 1S is being powered by the ChargePAK E1.
Cancelling an alarm
When a tone alarm is sounding, push the Tune dial or
press Standby to cancel the alarm. To cancel a digital
radio or FM radio alarm and return the radio to standby,
press the
Standby button.
Setting the kitchen timer
Evoke 1S has a countdown timer which will sound an
alarm after a set time period.
To set the kitchen timer
1. Press the Timer button, turn the Tune dial and
push to select ‘Kitchen timer’.
2. Turn the Tune dial to change the hours and push
to confirm. Turn again to change the minutes and
push to confirm and start the countdown timer.
The alarm will sound after the time period you have
set whether the radio is on or in standby. Cancel
the beeping alarm tone by pressing any button on
the radio.
08:30
08:30
22:45
08:30
08:30
The alarm is set to
sound at 8:30 am
Alarm volume
08
10
01 hours 00 mins
01 hours 25 mins
EVOKE_1S_manual-UK-Aus.indb 9 6/25/2012 1:25:18 PM