BBK Performance 5016 - Manual (Page 3)

1999-2004 Ford Mustang 4.6L 2-V
Fuel Rail Kit
Part #5016
3
INS-128
STEP 13 STEP 14
•
Reconnect the negative battery terminal.
WITHOUT STARTING THE ENGINE Turn the
ignition to the ON position for 3-4 seconds,
(primes the fuel system) then OFF 3 times and
return to the ON position. Check all connections
for fuel leaks. CORRECT ANY LEAKS
BEFORE STARTING!!! Re-install the intake
elbow and re-attach all connections. Re-install
the air inlet tube.
•
To avoid a possible check engine light
activation, start the engine and let it idle for
about 5 minutes, then drive the car at part
throttle for about 5 minutes before applying
heavy or full throttle. Otherwise, any air
bubbles/pockets that may have entered the
system will cause the Check Engine light will
come on and will need to be reset with a Proper
OBDII tool.
(1) Driver side rail
(1) Passenger Side Rail
(2) 10-32 x 1/4” SHCS
(2) Sensor mounting washers (small)
(4) 1/4”-20 x 3/8” BHCS
(4) M6x1.0x16mm BHCS
(4) Rail mounting brackets
(1) Spring-Lok fitting
(1) Regulator base O-ring
(5) O-Rings + (1) Spare
(12) Mounting tab washers
(1/4”) (15”) 3/8” Hose
(1) 13” Fuel line hose
(2) 9/16” Rail end plugs
(2) 9/16” Male-Male Rail end adapters
(2) 9/16” 90°Pushlock hose swivel fittings