Ridetech 11220199 - Manual (Page 8)

Installation Instructions
1. Raise and support vehicle at a safe and comfortable working height.
2. Support the axle then remove coil spring and shock. Refer to service manual for proper
disassembly procedure. Installing one side at a time will make the installation easier.
3. Apply thread sealant to a 90
degree air fitting and screw it into the
top of the air spring.
4. Screw the mounting pin into top of
the air spring.
5. Place the 4” diameter washer on
top of the frame, above the coil spring
pocket. Raise the air spring up to the
spring pocket with the pin sticking
through the washer. Secure with the
large cotter key.