HP StorageWorks XP Remote Web Console Software - Manual (Page 29)

To add a CU to the specified SLPR and return the CU to the CU list, select the CU from the
list, and click Add. A CU number with an asterisk (*) indicates the SSID is registered to the
CU. You can select up to 64 CUs into which the SSIDs are registered or not.
NOTE:
If users in the StorageAdmins group who have partition-level access want to use the Customized
Volume function, first specify the CU for each SLPR to prevent overlapping the newly allocated
CU numbers and the existing CU numbers in other SLPRs. If CU numbers are not specified
first, users in the StorageAdmins group who have partition-level access cannot use the
Customized Volume function.
• SSID(* in use): SSID in the selected SLPR (0004 to FFFE). An SSID number with an asterisk (*)
indicates the SSID is registered to the CU.
NOTE:
Only SSIDs registered to a CU belonging to the current CU group appear for SLPR0.
NOTE:
If a customized volume (CV) is set using the Customized Volume function, and the CU number and SSID are registered
to different SLPRs, a dash (
-) appears to the right of the SSID. For more information, see the
HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200.
• From: Starting number of the SSID added to the specified SLPR (0004 to FFFE). You can enter
an SSID that is in SLPR0.
• To: Last number of the SSID added to the specified SLPR (0004 to FFFE). You can enter up to
256 SSIDs that are in SLPR0.
NOTE:
To add SSIDs to an SLPR, enter the starting number in From, enter the last number in To, and
click Add.
NOTE:
If you add multiple SSIDs to the specified SLPR, the To number must be smaller than the From
number.
NOTE:
To delete an SSID from the SSID box, select the SSID from the SSID box, and click Delete.
XP Disk/Cache Partition user guide 29