Brother HL-2170W - Manual (Page 9)

1
1
1
What is in the box?
1
When you unpack the printer, make sure that you have all of the following parts.
Interface cable
1
The interface cable is not a standard accessory. Purchase the appropriate cable for the interface you are
using.
„ USB cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).
DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer
driver installation process.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB
port on a keyboard or non-powered USB hub.
Third party USB ports are not supported for Macintosh
®
.
„ Network cable (HL-2150N / HL-2170W only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
About this Printer
1
Printer
Quick Setup Guide CD-ROM
Drum unit and starter
toner cartridge
assembly
AC power cord