Warner Electric SFM and Brakes PBM Electro-Magnetic Single Disc User Manual
Page 2
2 Warner Electric Europe • +33 (0)2 41 21 24 24
P-2086-WE • 11/12
CONTENTS
1
Technical specifications
2
2
Precautions and restrictions on use
2
2.1
Restrictions on use
2
2.2
Precautions
2
and safety measures
3
Installation
3
3.1
Transport - storage
3
3.2
Handling
3
3.3
Installation
3
3.3.1 SFM VAR00 and VAR01
3
3.3.2 SFM VAR10 and VAR11
3-4
3.3.3 PBM VAR00, VAR01 and VAR02
4
4
Electrical connection
5
4.1
Important recommendations
5
4.2
Power supply
5
5 Appendices
6-7
We,
WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex
declare that the clutches and brakes made in our factories from St Barthélemy d’Anjou,
and hereafter designated :
SFM and PBM
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of
the product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 89/392/EEC and if
electric to the EMC directive 89/336 /EEC.
The conformity of the electric units to the Low Voltage directive 72/23 is supported by the full respect of the following standards : NFC 79300
and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, July 2002
E. PRAT, General Managing Director
1
Technical specifications
Table 1
SFM Sizes
10
20
40
70
150
250
500
Max. Speed
min
-1
Nominal airgap (0/+0,1)
mm
Dimension M VAR00
mm
Weight VAR00
kg
Weight VAR01
kg
Weight VAR10
kg
Weight VAR11
kg
8000
0,2
24
0,5
0,59
0,7
0,79
6000
0,2
26,5
0,9
1,1
1,2
1,4
5000
0,2
30
1,7
2,07
2,3
2,67
4000
0,3
33,5
3
3,6
4
4,6
3000
0,3
37,5
5,5
6,9
7,6
9
2500
0,5
44
10
13,1
13
16,1
2000
0,5
51
18,5
24,5
22,2
28,2
2
Precautions and restrictions on use
2.1 Restrictions on use
This equipment is designed for dry running.
Any oily material alters performance.
Exceeding the maximum rotation speed
stated in the catalogue invalidates the
warranty.
This equipment is designed for a maximum
ambi ent temperature of 40°C (155°C casing
class).
PBM Sizes
10
20
40
70
150
250
500
Max. Speed
min
-1
Nominal airgap (0/+0,1)
mm
Weight VAR00
kg
Weight VAR01/VAR02
kg
8000
0,2
0,3
0,4
6000
0,2
0,5
0,7
5000
0,2
0,95
1,32
4000
0,3
1,7
2,32
3000
0,3
3,3
4,8
2500
0,5
5,9
9
2000
0,5
11,5
17,6
2.2
Precautions and safety measures
During the maintenance period make sure that the
moving parts of the machine are stationary and
that there is no risk of start-up.
Any modification made to the unit without
any express approval of a Warner Electric
representative will invalidate the guarantee and
release Warner Electric from any liability regarding
conformity.