Warner Electric E330 - Manual (Page 2)

2 Warner Electric Europe • +33 (0)2 41 21 24 24 P-2041-WE • 2/13
NB: Data for catalogue equipment
2 Precautions and restrictions on use
2.1 Restrictions on use
E330 clutches are designed for dry running
(sealed bearings).
Exceeding the maximum rotation speeds stated
in the catalogue invalidates the warranty.
The suitable ambient temperature for these
units is max. 40°C (Insulation class of 155°C).
E330 clutches are designed for horizontal
running
CONTENTS
1 Technical specifications 2
2 Precautions and restrictions on use 2
2.1 Restrictions on use 2
2.2 Precautions in use 2
and safety measures
3 Installation 3
3.1 Transport - storage 3
3.2 Handling 3
3.3 Installing 3
3.3.1 Installing VAR00/04 3
3.3.2 Installing VAR504 3
3.3.3 Installing VAR05 4
4 Maintenance 4
5 Electrical connection 4
5.1 Important recommendations 4
5.2 Power supply 4
6 Appendix 5
6.1 Drawings / Part numbers 5-6
We: WARNER ELECTRIC EUROPE, 7, rue Champfleur, B.P. 20095, F-49182 St Barthélemy d’Anjou Cedex declare
that the clutches made in our factories from St Barthélemy d’Anjou, and hereafter designated : E330
are exclusively designed for incorporation into a machine and to be assembled with other equipments to create a machine. The operation of the
product is submitted to the conformity of the complete equipment, following the provisions of the machinery directive 98/37/EC and if electric to the
EMC directive 89/336 /EEC.
The conformity of the electric units to the Low Voltage directive 72/23 (modified) is supported by the full respect of the following standards : NFC
79300 and VDE 05808/8.65.
Drawn up in St Barthélemy d’Anjou, july 2002 E.
PRAT, General Managing Director
2.2 Precautions in use and safety measures
During maintenance, ensure that the machine’s
moving parts are stationary and that there is no
risk of accidental start-up. All intervention have to be
made by qualified personnel, owning this manual.
Table 1
Any modification made to the brake without
the express authorisation of a representative
of Warner Electric, in the same way than any use out
of the contrac tual specifications accepted by “Warner
Electric”, will result in the warranty being invalidated and
Warner Electric will no longer be liable in any way with
regard to conformity.