Warner Electric PB-650 Pin Drive - Manual (Page 19)

19 Warner Electric • 800-825-9050 819-0485
PB-500 Brake Heavy Duty Drawing I-25550
How to Order:
1. Specify Bore Size for Item 1.
2. Specify Voltage for Item 4A, 4B, or 4C.
3. Specify Inside Mounted for Item 4A and
Outside Mounted (Offset) for Item 4B or
Outside Mounted (Flush) for Item 4C.
Example:
PB-500 Brake per I-25550 - 90 Volt, Inside
Mounted, 1" Bore
These units, when used in conjunction with the
correct Warner Electric conduit box, meet the
standards of UL508 and are listed under guide
card #NMTR, file #59164. These units are CSA
certified under file #LR11543.
3A
2
(Shipped Assembled)
1
5
4A-1
4A
4B-1
4C-1
4B
4C
2-2
2-5
2-3
2-4
2-1
5
3B
Item Description Part Number Qty.
1 Armature Hub 1
3/4" Bore 5200-541-002
7/8" Bore 5200-541-003
15/16" Bore 5200-541-004
1" Bore 5200-541-005
1-1/8" Bore 5200-541-006
1-1/4" Bore 5200-541-007
2 Armature Assembly 5230-111-002 1
2-1 Armature 1
Segmented 5230-111-001
Solid 110-0076
2-2 Retainer Ring 748-0355 1
2-3 Autogap Spring 808-0412 1
2-4 Retainer Plate 748-0364 1
2-5 Screw 797-0028 3
3A Mounting Accessory - I.M. 5102-101-001 2
3B Mounting Accessory - O.M. 5300-101-008 1
4A Magnet - I.M. 1
6 Volt 5300-631-002
24 Volt 5300-631-003
90 Volt 5300-631-005
4A-1 Terminal Accessory 5311-101-001 1
4B Magnet - O.M. - Offset 1
90 Volt 5300-631-014
4B-1 Terminal Accessory 5311-101-001 1
4C Magnet - O.M. - Flush 1
6 Volt 5300-631-009
24 Volt 5300-631-010
90 Volt 5300-631-011
Item Description Part Number Qty.
4C-1 Terminal Accessory 5311-101-001 1
5 Conduit Box 5200-101-010 1