Accell MPC-LNK - Manual (Page 17)

-16-
FTMW (FTM – Work Bench)
FTMW is a programming tool for MPC-816 and MPC-68K, equipped with all the functions necessary for program development and
maintenance.
<- MPC-816 direct connection.
<- MPC-68K direct connection.
<- FTM Work Bench ends.
<- Dedicated editor starts (programming is possible away from the apparatus).
<- MPC system data are updated. Used for version upgrading.
<- Various kinds of settings are done. Absolutely necessary for program loading especially in 68k.
The dedicated editor is a specialized editor for MPC programming, equipped with reserved word management, simple help with command
format, etc. It allows efficient development of MPC programs even off-line.
Accel publishes the latest version of the above FTMW and MPC system data on our web side. By this, users can always use MPC
equipped with the latest software and latest functions (using the system loader).
http://accelmpc.com
List of Compatible Connectors
26-Pin I/O Connector
Hirose
Individual wires
Housing HIF3BA-26D-2.54C
Contacts HIF3-2226SCA (AWG#22~#26)
Pressure welding HIF3BA-26D-2.54R
JAE
Individual wires
Housing PS-D4C16
Contacts 030-51304-001 (AWG#24~#28)
Pressure welding PS-16SEN-D4P1-1C (Closed-end type)
16-Pin Connector for Pulse Port
Hirose
Individual wires
Housing HIF3BA-16D-2.54C
Contacts HIF3-2226SCA (AWG#22~#26)
Pressure welding HIF3BA-16D-2.54R
JAE
Individual wires
Housing PS-D4C16
Contacts 030-51304-001 (AWG#24~#28)
Pressure welding PS-16SEN-D4P1-1C (Closed-end type)
10-Pin Connector for RS-232C Port
Hirose
Individual wires
Housing HIF3BA-10D-2.54C
Contacts HIF3-2226SCA (AWG#22~#26)
Pressure welding HIF3BA-10D-2.54R
JAE
Individual wires
Housing PS-D4C10 (key at one part)
Contacts 030-51304-001 (AWG#24~#28)
Manual pressure-attaching tool
CT150-1-PSSF (AWG#24~#28)
Pressure welding PS-10SEN-D4P1-1C (Closed-end type)