Sonnet Technologies xMac mini Server (Revision D and Later) User Manual

Page 14

Chapter 3 – PCIe Cards, Computer, and xMac mini Server Installation Steps

C – xMac mini Server Rackmount Installation Information

You may mount xMac mini Server into any standard 19-inch EIA
compliant equipment rack at least 16 inches deep. It is recommended
that you mount xMac mini Server using rack slides or a rack shelf. Sonnet
offers rack slide sets for purchase separately; please visit the site at www.
sonnettech.com/product/xmacminiserver.html and click on the Accessory
tab for more information.

1. Install and secure the xMac mini in the equipment rack.

2. Connect any necessary interface cables to the back of xMac mini

Server;

verify the cables are plugged in securely.

3. Connect the supplied power cable between xMac mini Server and a

grounded wall outlet or power strip;

verify the cables are plugged in

securely.

Support Note:

If you haven’t set up your Mac mini, you will need

to connect a monitor, keyboard, and mouse to complete those steps.