King Kooker 2106 Heavy Duty Portable Propane Outdoor Smoker Package User Manual

Page 9

2. Read assembly instructions, and understand sequence of assembly, before commencing to

assemble your smoker.

3. Turn the smoker cabinet upside down. Install the four appliance legs using three black bolts on each

leg to the bottom of the smoker cabinet. The two front legs will have holes for connection to the face

panel assembly. After all four legs are connected, install the face panel assembly onto the front
appliance legs using four black bolts. Reference Figure 2 for proper leg and face panel assembly
placement.

4. Locate the hose and regulator. Check that the 3/8” female flare swivel end of the hose is

tightened onto the brass adapter on the bottom of the valve. The hose to valve conection must be
tightened and leak tested (see Leak Test instructions on page 12). See below Figure 2.

Valve End

2 Screws

Front View of Face Panel

Back Side of Front Panel

with Valve Installed

(Hose/Regulator Not Pictured)

Valve Orifice

Figure 2 - Hose Connection Diagram

Face Panel

Assembly