beautypg.com

Diamond Products CC1600 User Manual

Page 9

background image

MOUNTING A FLUSH CUT BLADE

NOTE

Always use a flush cut blade guard when flush cutting and a standard style blade guard

for all other cutting.

1.

Remove the standard flange from the blade shaft.

2.

Mount the flush cut flange to the blade shaft.

3.

Place the blade on the flush cut flange. Be sure the blade is mounted correctly.

The “tails” behind the diamonds should point opposite the blade rotation.

Reversing the blade will cause higher blade wear.

4.

Fasten the blade to the flange with six 5/16-18 x 1” flat head socket cap screws.

See also other documents in the category Diamond Products Power saws: