Detroit Radiant Products Company HLV Series - Manual (Page 4)

4
HLV Series 1.0 Introduction • HLV Series Specifications
Burner
Model Gas
Types
BTU/H
(High Fire)
BTU/H
(Low Fire)
Approximate System
Hanging Weights
Typical
Mounting
Height^
Combustion
Chamber
(Black Coated)
Radiant
Emitter
Tube(s)**
Condensing
Pipe
Per
Burner
Head
Per 10 Ft.
Radiant Pipe
& Reflector
Section
Per 10 Ft.
Tailpipe &
Reflector
Section
HLV-40* N or P 40,000 40,000 35 lbs. 35 lbs. 45 lbs. 9’ to 14’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-50* N or P 50,000 50,000 35 lbs. 35 lbs. 45 lbs. 9’ to 14’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-60 N or P 60,000 50,000 35 lbs. 35 lbs. 45 lbs. 10’ to 15’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-75 N or P 75,000 60,000 35 lbs. 35 lbs. 45 lbs. 11’ to 18’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-80 N or P 80,000 64,000 35 lbs. 35 lbs. 45 lbs. 11’ to 18’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-90 N or P 90,000 72,000 35 lbs. 35 lbs. 45 lbs. 12’ to 20’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-100 N or P 100,000 80,000 35 lbs. 35 lbs. 45 lbs. 12’ to 20’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-110 N or P 110,000 88,000 35 lbs. 35 lbs. 45 lbs. 13’ to 23’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-120 N or LP 120,000 96,000 35 lbs. 35 lbs. 45 lbs. 13’ to 25’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-125 N or P 125,000 100,000 35 lbs. 35 lbs. 45 lbs. 14’ to 27’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-140 N or P 140,000 112,000 35 lbs. 35 lbs. 45 lbs. 15’ to 30’ Al-Ti
Coated Alum or
Uncoated HRT
304 Stainless
Steel
HLV-150 N or P 150,000 120,000 35 lbs. 35 lbs. 45 lbs. 15’ to 30’ Al-Ti
Coated Alum or
Uncoated HRT**
304 Stainless
Steel
HLV-170 N or P 170,000 136,000 35 lbs. 35 lbs. 45 lbs. 16’ to 40’ Al-Ti
Coated Alum or
Uncoated HRT**
304 Stainless
Steel
HLV-175 N or P 175,000 140,000 35 lbs. 35 lbs. 45 lbs. 17’ to 42’ Al-Ti
Coated Alum or
Uncoated HRT**
304 Stainless
Steel
HLV-180 N or P 180,000 144,000 35 lbs. 35 lbs. 45 lbs. 18’ to 47’ Al-Ti
Coated Alum or
Uncoated HRT**
304 Stainless
Steel
HLV-200 N or P 200,000 160,000 35 lbs. 35 lbs. 45 lbs. 19’ to 50’ Al-Ti
Coated Alum or
Uncoated HRT**
304 Stainless
Steel
Specifications
Chart 1.1 • HLV Series Specifications
* The HLV-40 and HLV-50 do not have a reduction for low fire.
** All systems are designed to utilize either black coated aluminized steel (Alum) or uncoated hot-rolled steel (HRT)
radiant emitter tubes. On systems designed with the hot-rolled steel option, a coated aluminized steel radiant tube
(TP-26A) must be installed immediately downstream of the titanium stabilized aluminized steel (Al-Ti) combustion
chamber (TP-26B) on burner models HLV-150, 170, 175, 180 and 200 only.
^ Recommended mounting heights are provided as a guideline. Actual conditions may dictate variations from this data.
NOTE: Burner models HLV-170, 175, 180 and 200 receive TP-220 stainless steel tube clamp.