Detroit Radiant Products Company HLV Series - Manual (Page 29)

29
HLV Series 3.0 Installation • Reflector Assembly • Common Reflector Accessories
* Reflectors cannot be rotated once reflector accessories are installed.
** Refer to the Clearance to Combustibles data found in Chart 1.2, P.9 for minimum distances to
combustibles when side shield extension(s) are used.
Complete vacuum system options are detailed in the Detroit Radiant Products Company HLV Series
Accessory Guide (F/N: LPKHLV) or online at www.detroitradiant.com.
Figure 3.15 • Common Reflector Accessories
Side shield extension** (P/N: SSE)
Highly polished side shield extension
used to direct infrared rays
downward, away from sidewalls and
combustibles.
Elbow Reflector* (P/N: RE)
Highly polished aluminum
reflector used over an E6
90° elbow accessory fitting.
U-shaped Reflector* (P/N: RU)
Highly polished aluminum
reflector used over a 180°
U-bend accessory fitting.
Tee Reflector (P/N: V-RTE)
Highly polished aluminum
reflector used to cover a
V-T or V-TI tee fitting.
Cross Reflector* (P/N: V-RCR)
Highly polished aluminum
reflector used to cover a
V-CR cross fitting.