Chamberlain TAC1 - Manual (Page 9)

9
RELAY 1 RELAY 2
NOTE: For DC power install a 1N4001
diode or equivalent.
AC or DC Power
COM (Common)
NO (Normally Open)
NOTE: Do not use the unit’s
power supply for the door strike.
Door Strike
NOTE: For AC power install a
Siemens S10K30 MOV
(Metal Oxide Varistor)
or equivalent.
WIRING A DOOR STRIKE LOCK (NORMALLY OPEN)
RELAY 1 RELAY 2
NOTE: For DC power install
a 1N4001 diode or equivalent.
NOTE: Do not use the
unit’s power supply for the
maglock.
AC or DC
Power
Maglock
COM (Common)
NC (Normally Closed)
WIRING A MAGLOCK (NORMALLY CLOSED)
The door strike can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
The maglock can be connected to Relay 1 or Relay 2. See the
Programming section for information about configuring Relays 1
and 2.
INSTALLATION
>> WIRING A DOOR STRIKE LOCK (NORMALLY OPEN) AND
WIRING A MAGLOCK (NORMALLY CLOSED)
A UT OC
AL L
EXI T 2
COM EXI
T 1
HOUSE TELCO
Notes about wire connectors
(terminal blocks):
• Wire connectors can be
removed to simplify wiring.
• DO NOT overload wire
connectors. Use ONLY one
wire per hole.