Chamberlain TAC1 - Manual (Page 2)

2
TABLE OF CONTENTS
SPECIFICATIONS 3
Cable Requirements 3
Dimensions 3
Carton Inventory
3
INSTALLATION 4-11
Mount the Back Panel 4
Description of the Processor Board 4
Overview of Telco Wiring 5
Wiring the Unit With a Telco Line 6
Wiring the Unit Without a Telco Line 6
Wiring a Gate Operator (Normally Open) 7
Wiring an Auto-Call Sensor 7
Wiring a Gate Operator (Normally Open)
and a Door Strike Lock (Normally Open)
8
Wiring a Gate Operator (Normally Open)
and a Maglock (Normally Closed)
8
Wiring a Door Strike Lock (Normally Open) 9
Wiring a Maglock (Normally Closed) 9
Earth Ground Rod 10
Power Wiring 10
Plug the Transformer into the Outlet 11
Mount the Unit 11
Set the Unit Master Code 11
TESTING 12
Test the Gate/Door Relays 12
Test the Telephone Connections 12
PROGRAMMING 13-19
From the TAC1 Keypad 13
Code Setup 14
Code Operation 14
From the Telephone 15-16
Telephone Commands 16
Program a Pre-Installed Liftmaster Receiver 16
Quick Reference 17-18
TAC1 MASTER CODE 19
LIMITED WARRANTY 20