Chamberlain TAC1 - Manual (Page 18)

18
TELEPHONE PROGRAMMING
PROGRAMMING NUMBER DESCRIPTION OF TASK FACTORY SETTING PROGRAMMING PROCEDURE
**01 Enable Call Forwarding Disabled **01
**02 Disable Call Forwarding **02
**03 Enable Intercom Mode Disabled **03
**06 Verify Call Forwarding Number
(Via Caller ID) Disabled **06
**07 Enable Telco Mode Disabled **07
**#8 Erase Call Forwarding Number **#8
**10 Adjust Ring Count 5 **10 + Ring Count (2-5)
**13 Enable Alternate DTMF Programming Disabled **13
**14 Enable Standard (Long) Ring Tone Enabled **14
**15 Enable Alternate (Dual) Ring Tone Enabled **15
#*16 Disable Alternate DTMF Programming **16
*# Call Forwarding Number
#
Enter Call Forwarding Telephone Number *# + Telephone Number (Up to
14 digits) + #
DIRECT COMMANDS FROM THE LOCAL TELEPHONE
PROGRAMMING
NUMBER
DESCRIPTION OF TASK FACTORY
SETTING
PROGRAMMING PROCEDURE
*5 Triggers Relay 2 *5
*9 Triggers Relay 1 *9
**04 Enable Party (Latched) Mode
Relay 1 **04
**05 Disable Party (Latched) Mode
Relay 1
**11 Enable “Do Not Disturb” Mode Disabled **11
**12 Disable “Do Not Disturb” Mode **12
DIRECT COMMANDS FROM THE FORWARDED TELEPHONE
PROGRAMMING
NUMBER
DESCRIPTION OF TASK FACTORY
SETTING
PROGRAMMING PROCEDURE
0 Accepts Call From The Unit
(Also Extends Talk Time) 0
*5 Triggers Relay 2 *5
*9 Triggers Relay 1 *9
NOTE: Keypad commands are to be entered in a single string to result in success (indicated by double high success tone). Stop and go
keystrokes will result in negative tones (low single and triple fail tones).
NOTE: Use the STAR Key “*” to cancel any input.
PROGRAMMING
>> QUICK REFERENCE