Clear-Com PRC-2 - Manual (Page 20)

Vitec Group Communications
PRC-2 UHF Multi-Frequency Belt-Pack IFB Receiver
2 - 2
Front panel controls:
Single knob controls Audio Output Level,
Power on, programming and Scan
Frequency Selection
Indicators:
1 tricolor LED Indicator for poweron,
blinks to indicate channel number, blinks
fast during scan, and turns yellow or red
for low battery.
Power requirement:
Single 9V Alkaline Battery for
approximately 8 hours operation.
Power consumption:
60 mA.
Allen wrench for knob:
0.035”
Weight:
7.3 oz with battery
Size:
3.6 x 2.4 x 0.8 inches (housing only, belt
clip and knob extend beyond the
housing.)
Notice About Specifications
While Clear-Com makes every attempt to maintain the accuracy of the
information contained in its product manuals, that information is subject to
change without notice. Performance specifications included in this manual are
design-center specifications and are included for customer guidance and to
facilitate system installation. Actual operating performance may vary.