TSI IAQ10 - Manual (Page 16)

14
Symptom Possible
Causes Corrective
Action(s)
Display
reads “LO” Batteries are
low Replace the
batteries
Note: If your symptoms are not remedied
by the suggested corrective action, call TSI
Instruments Ltd.
SECTION 9
Internal DIP Switch Settings
To access the DIP switches, remove the
batteries from the battery compartment. On
the inside of the battery compartment,
there is a window with eight DIP switches.
The table below shows the functions for
each switch.
CAUTION:
Make certain that power is turned off before
changing DIP switch settings.