eLine Technology SIP-D - Manual (Page 6)

1 2
Getting Started
1. GETTING STARTED
The system comes with the following
components:
• 1 x Camera
• 1 x Mounting Screw Kit
• 1 x Allen Key
• 1 x RJ45 Coupler
• 1 x BNC Test Cable
• 1 x Mounting Template
• 1 x Quick Start Guide
• 1 x Instruction Manual
• 1 x Software/Documentation CD
Mounting Screw Kit:
• 3 x 2.8in / 70mm screws
• 3 x 1.2in / 30mm screws
• 3 x 1.6in / 40mm anchors
Allen Key RJ45 Coupler
BNC Test Cable
1.1 Default Camera Username, Password, and Ports
Username: admin
Password: admin
Ports: 80 (HTTP), 30001 (Control/Streaming), 8080 (RTMP), 554 (RTSP)
IP Address: DHCP Enabled by Default (Router will automatically assign IP
address)
NOTE: Once you have completed the basic setup of the camera, it is
recommended to configure a static IP address. This will prevent the camera
IP address changing in the event of a power failure. For details, see “6.7.1
Local Network” on page 26.
Getting Started
1.2 Camera Interior Overview
Front of Camera
Rear of Camera
BNC analog
output
Reset button
Termination cables
eLineTechnology.com