Draw-Tite 4449 GOOSENECK RAIL KIT - Manual

Installation Instructions
GOOSENECK MOUNTING KIT
Ford F-450
Will not fit Cab-on-Chassis vehicles
Part Numbers:
4449
Equipment Required:
WARNING:
Under no circumstances do we recommend
di h i hi l f d d hi l
Equipment Required:
Fastener Kit: 4443F
Wrenches: 7/16”, 9/16”, 5/8”, 11/16”, 3/4”,
15/16”, 13 mm
Drill Bits: 1/4”
Other Tools: Drill
exceeding the towing vehicle manufacturers recommended vehicle
towing capacity.
5/8” Vertical Fasteners
From Hitch Fastener Kit
9460/9470 Hide-A-Goose Installation
Vehicle Forward
NOTE
• Vehicle bed cross-members
not shown for clarity.
• All holes and slots typical
on both sides of vehicle.
Figure 1
Qty. (2) U-Bolt, 1/2-13 Qty. (1) Nylock Nut, 1/4 12 1 Q y ( ) , Q y ( ) y ,
Qty. (4) Flat Washer, 1/2 Qty. (1) Hex Bolt with Washer, M8 X 1.25 X 35mm
Qty. (4) Lock Washer, 1/2 Qty. (2) Hex Nut, M8
Qty. (4) Hex Nut, 1/2 Qty. (2) Conical Washer, 3/8
Qty. (6) 5/8 Conical Toothed Washer Qty. (2) Spacer, 3/8 X 1.50 X 2.00
Qty. (1) Cable Tie (not shown) Qty. (2) Locknut, 7/16-14
Qty. (6) Hex Nut, 5/8 Qty. (2) Hex Bolt, 7/16-14 X 1.50
14
15
16
17 6
7 18
12
13
5
4
3
2
1
z 2010 Cequent Performance Products Sheet 1 of 8 4449N 3-22-10 Rev. A
20
21
22
Q y ( ) , Q y ( ) ,
Qty. (2) Carriage Bolt, 5/8-11 X 2.50 GR5 Qty. (4) Shims, 1/4 X 2.00 X 1.00
Qty. (2) Block, 5/8 X 1.50 X 2.00 Qty. (4) Carriage Bolt -5 /8-11 x 2.50 GR8
Qty. (1) Hex Bolt, 1/4-20 X 1.25 Qty. (4) Flat Washer, 5/8
Qty. (2) Flat Washer, 1/4 Qty. (4) Nylon Lock Nut, 5/8
7
19 8
9
10
11