BEI Sensors Encoder Signal Broadcaster Module - Manual

The BROADCASTER accepts standard incremental encoder inputs, (two channels in quadrature plus an
index and complements) and can broadcast up to four encoder signals to four independent devices. Each
of the broadcast signals is optically isolated eliminating ground loops. This compact package also allows
for signal processing options, such as anti-dither filter, integer countdown or pulse and direction outputs, to
be incorporated into each of the four broadcast signals independently. The broadcaster is ideal for driving
multiple receivers from a single encoder in applications like electronic line shafting or synchronization of
multiple devices to a single operation.
924-02097-001 Rev 3/09
Copyright 2009 by BEI Industrial Encoders, 1-800-ENCODER, www.beiied.com
7230 Hollister Avenue, Goleta, California 93117-2807
Tel: 800-350-2727 Fax: 800-960-2726
ed.
The module accepts signals of 5, 12-15 and 24 VDC and provides three output options: V
out
= V
in
, V
out
= 5
V or NPN open collector. The compact package mounts to standard EN 50 022 35mm X 7.5mm DIN rail
and is 142mm wide, 78mm deep and 45mm above the DIN rail. A 155mm section of DIN rail is includ
BROADCASTER ORDERING OPTIONS For assistance, call 800-350-2727 (ASAP)
Use this diagram to construct your model number.
Example: BX-5-IC/V-IC/V-P2/5-P2/5
5 IC/V
Output Voltage from Encoder:
5, 15, 24
BX
Broadcaster
Output Voltage/Type:
/V = Multivoltage 5-28 Volts in, V
out = V in
/5 = Multivoltage 5-28 Volts in, V out = 5V regulated
/OC = Multivoltage 5-28 Volts in, Vout = Open Collector
IC/V
Choose one for each channel:
IC = Isolation Circuit (Standard)
DB = Divide By, selectable integer value 1-256
AD= Anti-Dither
Px = Pulse Up/Down where x = multiple, either 1, 2, or 4
PxD = Pulse Direction where x = multiple, either 1, 2, or 4
Function for
Channel 2 Function for
Channel 1 Function for
Channel 3 Function for
Channel 4
P2/5 P2/5
FEATURES
• Broadcasts signals from a single encoder to
four independent receivers
• Signal processing modules (pulse converter,
integer countdown, anti-dither) can be added
to each output for additional capabilities
• Accepts all standard input voltages and
types: single ended, differential and open
collector
• Signals are optically isolated for high noise
immunity
•
Compact package saves installation costs
BEI ELECTRONIC MODULES
Encoder Signal Broadcaster