Atec Tektronix-TCP202 - Manual

hen combined with a
Tektronix TDS oscil-
loscope, the TCP202
enables users to make
direct readout DC and AC
current measurements,
resulting in accurate dis-
played and recorded mea-
surements.
The TCP202 is a general-
purpose probe for display-
ing and measuring current
in electronic circuits. It’s
ideal for power supply and
motor drive design, and for
device testing.
TCP202 DC Coupled Current Probe
Easy Current Measurements
Probe Connects Directly
to TDS Scope through
TEKPROBE™ Interface
Split Core Construction
for Easy Circuit Connection
DC to 50 MHz Bandwidth
15 Amps DC + Peak AC Current
50 Amps Peak Pulse Current
500 x 10 –6 Amp * Sec Product
UL, CSA, CE Marking
S TA N D A R D
S P E C I F I C AT I O N S
Bandwidth
DC to 50 MHz
Max DC + Peak AC Current
15 A
Max Peak Pulse Current
50 A
Minimum Sensitivity
10 mA/div
DC Accuracy
±1% (with probe calibrator)
±3% (without probe calibrator)
Max Bare Wire Voltage
300 V (Cat I)
T Y P I C A L
C H A R A C T E R I S T I C S
Insertion Impedance
0.002
Ω at 1 kHz
0.1 Ω at 5 MHz
Propagation Delay
17 ns
Max Conductor Diameter
3.8 mm (0.15 inch)
Electrostatic Immunity
(per IEC 801-2)
> 8 kV
Amp * Sec Product
500 x 10 –6 Amp * Sec
Rise Time
≤ 7.0 ns
P H Y S I C A L
C H A R A C T E R I S T I C S
Weight
0.19 kg (0.44 lb)
Cable Length
2.2 m (7.2 ft)
POWER REQUIREMENTS
TCP202 is powered by the
TDS oscilloscope via the
TEKPROBE™ interface
SAFETY CERT I F I C AT I O N S
UL 3111-1
CSA 1010.1
IEC 1010-1, 1010-2-032
W
1