Alpha Technologies ECM - Manual (Page 9)

9 TM 744-862-C0-003 Rev.C
Engine Control Module (ECM)
• The system must be installed ONLY by qualified service personnel.
• Consult local utility codes for additional cabinet grounding and utility
requirements.
• ALPHA TECHNOLOGIES is not responsible for broken welds or other
damage to the cabinet caused by improper installation.
• All dimensions are given in inches.
• For further information regarding this installation, contact ALPHA
TECHNOLOGIES or your nearest ALPHA representative.
For general product information and Customer Service
7:00AM to 5:00PM Pacific Time
1-800-863-3930
To obtain complete Technical Support,
7:00AM to 5:00PM Pacific Time
or
For after-hours Emergency support
7 days per week, 24 hours a day
1-800-863-3364
NOTE: Alpha Technologies’ products are subject to change
through continual improvement processes. Therefore,
specifications and/or design layouts may vary slightly
from descriptions included in this manual. Updates to
the manual will be issued when changes affect form, fit
or function.
Retain these instructions for future reference
IMPORTANT INSTALLATION NOTES