Aeromotive 17158 - COBRA JET COMPLETE FUEL SYSTEM - Manual (Page 3)

1-8. Next find a place for the two AN-08 fuel bulk heads, p/n 15685. The most common place for the two bulk heads are
on the driver’s side in the spare tire well. Drill the two holes two inches apart, Figure 1-3.
Figure 1-3
1-9. Install one of the supplied 15610 fittings into the outlet of fuel pump (Make sure the fitting has the AN-10 o-ring
installed on it).
1-10. Assembly two hoses, both with 90-degree hose end on all ends. One will be used for the pump outlet and the other
will be used for the return, Figure 1-4.
Figure 1-4
1-11. After connecting the return and pump outlet lines to the bulk heads, move to the under side of the vehicle.
1-12. Find a location for the fuel filter (12321) and mounting bracket (12305). Typical mounting location on the passenger
side frame rail, Figure 1-5.